Choosing the correct pneumatic tools to increase the productivity and improve quality control and increase profits, the report of the mining and industrial market manager Bellambie Dudley ward.
“Ensure the best performance and prolong the service life of pneumatic tools, appropriate selection, installation, use and regular maintenance is very important,” added ward.
The correct lubrication is one of the most important elements in the economic operation and maintenance of air tool.
In order to avoid tool failure, the equipment must be through the air inlet air motor multivane of daily lubrication and hammer, or through the air-line air filters and lubricators.
Best performance also depends on pneumatic-which supply clean, dry air in the correct pressure; And tools is running, reduce air pressure is recommended for a screwdriver.
Suitable hose and fittings is very important also, in order to avoid air distribution and the loss of pressure, and promote a rapid coupling and change in the air of the tools.
Sapco, form part of the Bellambie mining and industrial division, has been the sole distributor of the car Uryu pneumatic tools in southern Africa in the past 20 years.
Tools including bolts and nuts locator, screwdriver, abrasive, training and tappers, and percussion tools and accessories, from its place, can these countries also provide technical advice and service.
The range is gathered in Japan, precision machined components, beyond the first-class level.
This paper introduce a new Bellambie measuring system Uryu foot-market, designed to measure accurately the oil-points dynamic torque and tools. Grade
These ums sensor, ideal for use in quality management field and workshop of test equipment, non-contact, by magnetostrictive transducer and the rotating torque auditor, provide automatic data storage and analysis 1 000 readings.
To create a positive magnetostrictive effect of the transducer in load, the excitement of grooves in the two areas are provided at the anvil surface about 45.
Bellambie mining and industrial, part of the Sapco division of labor, extend its range of car pneumatic tools, including new alpha series, this is the fifth generation in Uryu a series of oil-mechanical assembly tools points.
There is a blade that-alpha series of double-it stagnant air motor production 50% higher than the same physical size of the tool, use a conventional and air motor, explain Bellambie marketing manager Dudley ward.
Provide free speed range to 100 r/min 3 and 5 500 r/min, with minimal effort ripple.
Double-blade is an effective tool for solving pulse mechanism make different tightening, easy management soft and hard joint conditions.
Bolt seat effective applied in the ear, the rotation of the joint there-torque caused by the anvil, is reduced to a minimum.
Benefits include low noise, operation process of reducing vibration and almost no torque reaction.
Air consumption average between 0, 25 m3 / minutes, 0, 7 m3 / minutes, according to the model and efficient motor power cycle time is different, provides the optimized combination conditions.
The gas has started a advanced man-machine engineering design-a single hand-the lever that is easy to operation forward/reverse sports jacket, perfect the palm-fitting vibration operation to comfort and safety.
Air Tools/Spray Guns